Electrical Tape Good Scalability

- Aug 17, 2017 -

Generally used in higher levels of voltage, because of its good ductility, electrical tape better than the second on the waterproof, so it is also applied to the field of low pressure, but because of its strength as pvc electrical flame retardant tape , Usually these two kinds of use.

First look at whether there are flaws, tape rewinding is obedient, cut whether there is no burr, whether it is smooth to see tape material (electrical insulation tape has many types, electrical tape not one by one to introduce the material judged good or bad, in most cases also Look at the use of).

Look at the glue, and now most of the glue has been to the evolution of the environment, the taste is very important, if it is pungent, is the possibility of defective product is relatively large (not all tape), is used in the tape when there is no anti- After the use of tear off there is no residual glue, if the residual glue in the product, this is the fatal point of the defective tape.

It is insulated, flame retardant, and waterproof three functions, but because it is pvc material, so the ductility is poor, can not be very tight package, waterproof is not very good, electrical tape but it has now been widely used.

Only the insulation function, but not fire-retardant is not waterproof, and now has been gradually eliminated, and only in some civil construction electrical also some people in use.

Electrical tape full name for the PVC insulation adhesive tape, electrical tape it was called electrical insulation tape or insulation tape. The electrical tape is suitable for the insulation of various resistance parts. General electrical insulation tape has three kinds, one is insulated black tape, the second is pvc electrical flame retardant tape, the third is the high-pressure self-adhesive tape, three of each have their own functions.

One is insulated black tape, only the insulation function, electrical tape but not fire-retardant is not waterproof, and now has been gradually eliminated, and only in some civil construction electrical also some people in use.

The second is pvc electrical flame retardant tape, it has insulation, flame retardant, and waterproof three functions, but because it is pvc material, so the ductility is poor, electrical tape can not be wrapped very tight joints, water resistance is not very good, But it has now been widely used.

The third is the high-pressure self-adhesive tape, generally used in the higher level of voltage, because of its good ductility, waterproof than the second better, electrical tape so people also apply it in low-voltage areas, but because Its strength is not as good as pvc electrical flame retardant tape, usually these two kinds of use.

From the outside to see if there are flaws, tape rewinding is obedient, cut whether there is no flash, whether the smooth look at the tape material (electrical insulation tape has many types, in most cases have to see the use of) look at the glue, Part of the evolution has been to the environmental protection, electrical tape the taste is very important, if it is pungent, is the possibility of defective relatively large (not all the tape), look at the use of tape when there is no anti-stick, tear off after use there is no residual Glue, if the residual glue in the product, this is the fatal point of the defective tape. electrical tape Tape PVC material is basically the same, mainly to see the glue, poor quality tape after a period of time, and then unlock, you can see the glue and PVC material separation, electrical tape looks sticky, very uncomfortable, and good quality tape There will not be such a problem.


Previous: No Information

Next: Tapes The Quality

Related News

Related Products

  • EVA Foam Insulation Sheets Using 3m Adhesive
  • High Density Neoprene Foam Sheets CR Flame Retardant Materials
  • PVC Foam Insulation Blocks Sheets Different Thickness Rolls
  • PVC Foam Rubber Seal Gaskets More Viton Gaskets
  • PU Foam Glazing Tape for Glass and Glazing
  • High Quality Colored Electrical PVC Tape