Home > Knowledge > Content

foam tapes Have a good seal

- Aug 18, 2017 -

1, before the paste before the removal of adhesive objects on the surface of the dust, oil traces, and keep dry (do not even rainy days in the case of wet wall paste). foam tapes Such as for the paste mirror, it is recommended to use alcohol to clean the adhesive surface.

2, paste the working temperature should not be less than 10 ℃, or you can use the appropriate hair dryer adhesive tape and paste the surface,

3, pressure-sensitive adhesive tape in the paste after 24 hours to play the best effect (when the adhesive tape to speak as much as possible), so paste the vertical load-bearing objects such as mirror, etc., foam tapes both sides are already in the case of adhesion 24 hours. If there is no such conditions, vertical adhesion within 24 hours, to support the load-bearing objects

The new high-density open-ended polyurethane foam tape series further enhances the convenience, performance and economy of OEM production, which has excellent damping performance and absorbs moisture, light, dust and various contaminants.

  The foam tape is coated with a durable, foam tapes highly viscous acrylic adhesive that is well suited for all types of OEM products that require good sealing, vibration and recovery. Double-sided foam tape can also be used to replace the standard fasteners in assembly operations, foam tapes in addition to the security of the cable clip fixed, fixed on the wall circuit, in the ceiling and wall installation of noise board, installation nameplate, And soap dispenser. The foam-uniform unit structure is suitable for most clean dry materials, foam tapes including rough surfaces.

1, light weight EPS packaging products part of the space for the gas replaced by each cubic decimeter volume contains 300-600 million independent sealed bubbles. So it is several times the plastic volume several times to several times.

2, with the ability to absorb the impact load. EPS packaging products by the impact load, the bubble in the gas through the stagnation and compression, foam tapes so that the external energy is consumed, dissipated, foam tapes the bubble with a small negative acceleration, the gradual termination of the impact load, it has a better shock effect.

3, good insulation performance. The thermal conductivity is a weighted average of pure EPS thermal conductivity (108 cal / m.h. ° C) and air thermal conductivity (about 90cal / m.h ° C).

4, good sound insulation. EPS product noise mainly through two ways, one is to absorb sound energy, reduce reflection and transmission; the second is to eliminate resonance, foam tapes reduce noise.

5, anti-aging, corrosion performance. In addition to prolonged exposure to high energy radiation, the product no significant aging phenomenon. Can withstand many chemical substances, foam tapes such as dilute acid, dilute alkali, methanol, lime, asphalt and so on.

6, anti-static performance. foam tapes As the EPS products with low conductivity, so easy to produce their own in the friction phenomenon, foam tapes the general user products will not be affected. foam tapes For high-precision electronic products, especially modern large-scale integrated building block components, should use anti-static EPS products.

Related Industry Knowledge

Related Products

  • Low High Density PE Foam Sheet Popluar in USA
  • High Density Neoprene Foam Sheets CR Flame Retardant Materials
  • NBR Expanding Insulation Foam Sheets Oil Resistance
  • Silicone Foam Panels Sheets UV and Ozone Resistance
  • Silicone Foam Seal Gaskets UV and Ozone Resistance
  • PORON Gaskets Maker Shock Absorbing